BUK224-50Y,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | 150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | TOPFET™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BUK2 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 35V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 12A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 70 μs |
| Output Peak Current Limit-Nom | 12A |
| Rds On (Typ) | 22m Ω |
| Turn Off Time | 95 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.5mm |
| RoHS Status | ROHS3 Compliant |
BUK224-50Y,118 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included in the package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB.It has been mounted as Surface Mount on the LED driver.A General Purpose switch type is owned by it.The temperature should be set to 150°C TJ to ensure reliable functioning.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.It belongs to the BUK2 family.As a result, there are 4 terminations.It contains 1 functions.In terms of output, the lighting driver can provide a maximum of 12A V.Using a voltage of 13V allows for high efficiency.The LED driving board is equipped with a total of 4 pins.It is part of the TOPFET? series.The LED driver is configured with a maximum supply voltage of 35V (Vsup).Normal operation requires a voltage above 5.5V for the supply voltage.
BUK224-50Y,118 Features
Supplied from 13V
BUK224-50Y,118 Applications
There are a lot of NXP USA Inc. BUK224-50Y,118 Power Switches ICs applications.
- PDAs
- HDD, SSD
- Telecom and Network Systems
- Storage Drives
- USB Power Distribution
- USB Power Distribution
- Handheld Devices
- Hard Disk Drives
- Set-Top Boxes
- Portable/Handheld Devices
