CA3140AMZ96
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Operating Supply Voltage | 28V |
| Temperature Grade | MILITARY |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 180mW |
| Current - Output | 10mA |
| Slew Rate | 9 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 10pA |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 4.5MHz |
| Gain Bandwidth Product | 3.7MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 18V |
| Low-Bias | YES |
| Min Dual Supply Voltage | 2V |
| Bias Current-Max (IIB) @25C | 0.00004μA |
| Dual Supply Voltage | 9V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
CA3140AMZ96 Overview
A SOIC case is used to package the op amp. This is a OPERATIONAL AMPLIFIER type op amp. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 8 pins. The input offset voltage is 2mV. It is possible to operate this buffer amplifier from a supply current of 4mA . The voltage gain should stay at 100dB. Instrumentation amplifier has 1 channels on it. It should not lower than -55°C to operate buffer amplifier. It is recommended that op amp be used at temperatures below 125°C. The operating supply voltage of instrumentation amplifier is rated 28V voltage. This linear amplifier pack is based on the TAPE AND REEL axis. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 36V, and this is an excellent feature. The linear amplifier's supply voltage should be higher than 4V. As a general rule, you should conduct this electronic component under dual supply voltages of 18V volts.
CA3140AMZ96 Features
8 Pins
supply voltage of 15V
100dB voltage gain
CA3140AMZ96 Applications
There are a lot of Intersil (Renesas Electronics America) CA3140AMZ96 Instrumentational OP Amps applications.
- Proportional counter tubes
- Power control
- Differentiator circuits
- Car stereo
- pH (acidity)
- Portable media players
- Voltage regulation circuit
- ECG equipment
- Proportional operation circuits
- Multimedia playback equipment
