banner_page

CALVC164245IZQLREP

Surface Mount 56 pinsTape & Reel (TR) Voltage Translators & Level Shifters 2 Voltage Level 56-VFBGA Discontinued 1 (Unlimited)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CALVC164245IZQLREP
  • Package: 56-VFBGA
  • Datasheet: -
  • Stock: 829
  • Description: Surface Mount 56 pinsTape & Reel (TR) Voltage Translators & Level Shifters 2 Voltage Level 56-VFBGA Discontinued 1 (Unlimited) (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 56-VFBGA
Surface Mount YES
Number of Pins 56
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Series 74ALVC
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Subcategory Bus Driver/Transceivers
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position BOTTOM
Terminal Form BALL
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number LVC164245
Pin Count 56
Qualification Status Not Qualified
Output Type Tri-State, Non-Inverted
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.35V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 2
Load Capacitance 50pF
Number of Ports 2
Number of Bits 16
Propagation Delay 5.8 ns
Family ALVC/VCX/A
Logic Function Level Shifter
Output Characteristics 3-STATE
Output Polarity TRUE
Logic IC Type BUS TRANSCEIVER
Channel Type Bidirectional
Control Type COMMON CONTROL
Translation 3V & 5V
Translator Type Voltage Level
Voltage - VCCA 2.3V~3.6V
Voltage - VCCB 3V~5.5V
Channels per Circuit 8
Height Seated (Max) 1mm
Length 7mm
Width 4.5mm
RoHS Status ROHS3 Compliant

CALVC164245IZQLREP Overview


56-VFBGA contains it.A Tape & Reel (TR) package is used to package it.In this configuration, the output is set to Tri-State, Non-Inverted.Voltage Level is the translator type of this electrical device.The electronic part is mounted in a way that corresponds to Surface Mount.The Channel type of this electrical device is Bidirectional.There is -40°C~85°C TA operating temperature.The circuit's superior flexibility is achieved through the use of 2 circuits.There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.A series of related parts can be derived from the base part number LVC164245.In order to power the device, a voltage supply of 3.3V is required.There are 56 pins on this device.In terms of its design, it is a member of the 74ALVC series.Level translators is designed wLevel translatorsh 56 pins.The design of this electronic part contains 16 bits.There is a configuration of 2.3V~3.6V for the VCCA supply rail.VCCB is configured with a supply rail that starts at 3V~5.5V.In Bus Driver/Transceivers, this part is included.Level translators uses the logic IC BUS TRANSCEIVER.2 terminations are possible, which each match the transmission line's characteristic impedance.Level translators is a member of the ALVC/VCX/A family of electronic devices.There is a 3.35V power supply used in the operation of the machine.TAPE AND REEL is well suited to this device because of its reliability.In order to function normally, the supply voltage (Vsup) should be kept above 3V.

CALVC164245IZQLREP Features


56-VFBGA package
2 circuits
56 pin count
74ALVC series
56 pins
3.35V power supplies

CALVC164245IZQLREP Applications


There are a lot of Texas Instruments CALVC164245IZQLREP voltage translators & level shifters applications.

  • Extended Product-Change Notification
  • Extended Product Life Cycle
  • Automotive infotainment
  • Controlled Baseline
  • TVs
  • SDIO
  • Personal Electronics
  • Controlled Baseline
  • Eliminate Slow or Noisy Input Signals
  • Push-pull level shifting (UART, SPI, JTAG, and so forth)

Write a review

Note: HTML is not translated!
    Bad           Good