CAS 25-NP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | Module |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2004 |
| Series | CAS |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 10 |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | UNSPECIFIED |
| Terminal Form | PIN/PEG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 20mA |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | Bidirectional |
| Accuracy | ±0.8% |
| Response Time | 0.3μs |
| Sensor Type | Flux Gate, Closed Loop |
| Linearity | ±1% |
| Sensitivity | 25mV/A |
| For Measuring | AC/DC |
| Current - Sensing | 25A |
| RoHS Status | RoHS Compliant |
CAS 25-NP Overview
To ensure the safety of the current sensors, they are packaged in Module packages. For protection, these current sensors are packaged in a Tray. In general, current sensors should provide no more than 20mA amps of current. Sensors with 10 terminations measure current. During their working life, these current sensors can provide voltage of 5V. Current sensors should supply a minimum voltage of 4.75V. However, the current sensor voltage should not exceed 5.25V.
CAS 25-NP Features
Moisture Sensitivity Level: Not Applicable
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Flux Gate, Closed Loop
Supply Voltage: 4.75V~5.25V
Frequency: 300kHz
Sensing Current: 25A
Module Package
CAS 25-NP Applications
There are a lot of LEM USA Inc. CAS 25-NP Current Sensors applications.
- Overcurrent protection
- Motor and load control
- Leakage Current Sensors
- Battery chargers and systems
- Mobile applications
- Power supply management
- AC variable speed drives
- Inverter and H-bridge current measurements
- Switched Mode Power Supplies(SMPS)
- Static converters for for DC motor drives
