CAS 6-NP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | Module |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2004 |
| Series | CAS |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 10 |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | UNSPECIFIED |
| Terminal Form | PIN/PEG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 20mA |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | Bidirectional |
| Accuracy | ±0.8% |
| Response Time | 0.3μs |
| Sensor Type | Flux Gate, Closed Loop |
| Linearity | ±1% |
| Sensitivity | 104.2mV/A |
| For Measuring | AC/DC |
| Current - Sensing | 6A |
| RoHS Status | RoHS Compliant |
CAS 6-NP Overview
Current sensors are packaged in Module packages to ensure their safety. In order to protect the devices from damage, these current sensors are packaged in the Tray. There should be 20mA as the maximum current supplied by these current sensors. Currently, the sensors have 10 terminations. It is possible to supply voltage of 5V when these current sensors are working. It is recommended that current sensors supply a minimum voltage of 4.75V. In any case, current sensors should not supply voltages above 5.25V.
CAS 6-NP Features
Moisture Sensitivity Level: Not Applicable
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Flux Gate, Closed Loop
Supply Voltage: 4.75V~5.25V
Frequency: 300kHz
Sensing Current: 6A
Module Package
CAS 6-NP Applications
There are a lot of LEM USA Inc. CAS 6-NP Current Sensors applications.
- Power factor correction
- Frequency, Voltage, and Solar Inverters
- Switched Mode Power Supplies(SMPS)
- Monitor Motor Operation
- Inverter and H-bridge current measurements
- DC and AC power monitoring
- AC variabel speed drives and servo motor drives
- Uninterruptible Power Supplies(UPS)
- Proving Switch
- Uninterruptable Power Supllies (UPS)
