CAT1021LI-30-G
| Parameters | |
|---|---|
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 3.075V; MANUAL RESET INPUT |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CAT1021 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 3mA |
| Power Dissipation | 1W |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
CAT1021LI-30-G Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tube, power management is easy to use. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at NOT SPECIFIED. IC management conducts at a voltage of 3.3V. IC management conducts in a 1-voltage supply. Power management is included in the Through Hole mount. Power management has a total of 8 pins. 8 pins make up the power management. IC management can only work with a supply voltage of 2.7V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Through Hole. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. There is a supply current of 3mA for the power management. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It is always advisable to use CAT1021, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 3mA at the most.
CAT1021LI-30-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1021LI-30-G Applications
There are a lot of ON Semiconductor CAT1021LI-30-G Voltage Supervisors applications.
- Precision measurement
- Satellite navigation
- Military electronics
- Power distribution systems of CCU
- Functional modules
- emergency room
- Rechargeable batteries
- Military communications
- Detection of phase sequence
- Automotive permanent magnet synchronous motors
