CAT1021WI-25-GT3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.625V; MANUAL RESET INPUT |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CAT1021 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 3mA |
| Power Dissipation | 1W |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT1021WI-25-GT3 Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be NOT SPECIFIED. The supervisor is always powered by a 3.3V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. There are a total of 8 pins on power management. 8 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2.7V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. As far as the supply current of the power management is concerned, it is 3mA. There are other features such as RESET THRESHOLD VOLTAGE IS 2.625V; MANUAL RESET INPUT to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to CAT1021, which is the base power ics number. The maximum supply temperature voltage supervisor can handle is 3mA.
CAT1021WI-25-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1021WI-25-GT3 Applications
There are a lot of ON Semiconductor CAT1021WI-25-GT3 Voltage Supervisors applications.
- Radar
- DC stabilized power supply module
- DSP
- Insulation fault location system
- Smart meter
- Urban rail transit weak current power monitoring
- WiFi router
- Microcontroller system
- Functional modules
- Household appliances
