CAT1021WI-30-GT3
| Parameters | |
|---|---|
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 18 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 3.075V; MANUAL RESET INPUT |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CAT1021 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 3mA |
| Power Dissipation | 1W |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
CAT1021WI-30-GT3 Overview
Power management is mounted through 8 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. When a supply voltage of 3.3V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. There are a total of 8 pins on power management. 8 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 2.7V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is estimated that the voltage supervisor's supply current is 3mA. As well as this, there are other features to mention such as [0], for example. To find similar IC managements from the manufacturer, you can always search by CAT1021. The power management can work with a maximum supply temperature of 3mA.
CAT1021WI-30-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1021WI-30-GT3 Applications
There are a lot of ON Semiconductor CAT1021WI-30-GT3 Voltage Supervisors applications.
- Satellite navigation
- Network equipment
- emergency room
- Medical-specific isolation transformer
- Smartphones
- Leakage protection
- Detection of phase loss
- DC stabilized power supply module
- Magnetic resonance imaging
- Radio
