CAT1023WI-28-GT3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.925V; MANUAL RESET INPUT |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CAT1023 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Memory Size | 256B |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1W |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT1023WI-28-GT3 Overview
As you can see, this power management is mounted through 8 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at NOT SPECIFIED. IC management conducts at a voltage of 3.3V. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. There are a total of 8 pins on power management. Power managment ic pin count is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.7V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. The power management's supply current is 3mA. Among other features, IC power can be also taken advantage of [0], for instance. It is always advisable to use CAT1023, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 3mA can be used. There is an 256B memory zone in this IC management.
CAT1023WI-28-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1023WI-28-GT3 Applications
There are a lot of ON Semiconductor CAT1023WI-28-GT3 Voltage Supervisors applications.
- Embedded computing
- Battery cars
- Dash board
- Kitchen appliances
- Fire equipment power monitoring system
- Detection of phase loss
- Rechargeable batteries
- Solar power charger
- Multi-voltage system
- Electronics installed in the vehicle
