CAT1023WI-30-GT3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 3.075V; MANUAL RESET INPUT |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CAT1023 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 3mA |
| Power Dissipation | 1W |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Halogen Free | Halogen Free |
| Density | 2 kb |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Max Frequency | 400kHz |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT1023WI-30-GT3 Overview
Power management is mounted through 8 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. As specified in the package specification, the peak reflow temperature of the package is set at NOT SPECIFIED. During operation, the power ic is supplied with a voltage of 3.3V. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. A total of 8 pins are located on this power management. 8 pins are on the supervisor. IC management can only work with a supply voltage of 2.7V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 3mA, this PMIC is capable of fully function as specified. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use CAT1023, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 3mA can be used.
CAT1023WI-30-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1023WI-30-GT3 Applications
There are a lot of ON Semiconductor CAT1023WI-30-GT3 Voltage Supervisors applications.
- WiFi router
- Linux and server computing
- emergency room
- Important electronics for automotive safety
- Set top box
- Medical-specific insulation monitor
- Digitally controlled LDO regulators circuit
- Battery-powered equipment
- Fire equipment power monitoring system
- Magnetic resonance imaging
