CAT1023WI-42-GT3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.375V; MANUAL RESET INPUT |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CAT1023 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | -2V |
| Operating Supply Current | 10μA |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.5V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT1023WI-42-GT3 Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. A supply voltage of 3.3V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. It has a total of 8 pins that are attached to IC management. There are 8 pins on the power managment ic. It is recommended that Vsup should not be less than -2V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 10μA. Among other features, IC power can be also taken advantage of [0], for instance. You can always use CAT1023, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 3mA at the most.
CAT1023WI-42-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of -2V
10μA operating supply current
CAT1023WI-42-GT3 Applications
There are a lot of ON Semiconductor CAT1023WI-42-GT3 Voltage Supervisors applications.
- Set top box
- Power distribution systems of operating room
- Leakage current detection
- Embedded computing
- Military electronics
- DC stabilized power supply module
- Electronics installed in the vehicle
- Low voltage/high power - AI, GPU
- Utility meter
- Smart meter
