banner_page

CAT1025WI-25-GT3

3V8 Terminals 8-Pin CAT1025 Voltage supervisor1 Channels Min -2V Max 7V


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-CAT1025WI-25-GT3
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 792
  • Description: 3V8 Terminals 8-Pin CAT1025 Voltage supervisor1 Channels Min -2V Max 7V (Kg)

Details

Tags

Parameters
Number of Functions 1
Supply Voltage 3V
Base Part Number CAT1025
Output Open Drain or Open Collector
Pin Count 8
Number of Channels 1
Max Supply Voltage 7V
Min Supply Voltage -2V
Operating Supply Current 10μA
Max Supply Current 3mA
Adjustable Threshold NO
Watchdog Timer No
Reset Active High/Active Low
Number of Voltages Monitored 1
Reset Timeout 130ms Minimum
Halogen Free Halogen Free
Min Reset Threshold Voltage 2.55V
Undervoltage Threshold 2.7V
Length 4.9mm
Width 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2007
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature RESET THRESHOLD VOLTAGE IS 2.625V; MANUAL RESET INPUT
Max Power Dissipation 1W
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING

CAT1025WI-25-GT3 Overview


It is mounted through 8 terminals on the power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Manage ics operate at 3V supply voltages. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. The total number of pins on this power management is 8. There are 8 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of -2V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 7V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. For this power management, there is an 10μA volt supply current. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 2.625V; MANUAL RESET INPUT to name a few. It is always advisable to use CAT1025, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 3mA.

CAT1025WI-25-GT3 Features


Simple Reset/Power-On Reset type
Minimum supply voltage of -2V
10μA operating supply current

CAT1025WI-25-GT3 Applications


There are a lot of ON Semiconductor CAT1025WI-25-GT3 Voltage Supervisors applications.

  • Fire equipment power monitoring system
  • Stable power system
  • Solar power charger
  • Power distribution systems of ICU
  • DC stabilized power supply module
  • Leakage current detection
  • Microcontroller system
  • Digitally controlled LDO regulators circuit
  • Efficient information transmission
  • Automotive power systems

Write a review

Note: HTML is not translated!
    Bad           Good