CAT1026WI-30-GT3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 3.075V |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | CAT1026 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 10μA |
| Power Dissipation | 1W |
| Max Supply Current | 3mA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 130ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3.15V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT1026WI-30-GT3 Overview
It is mounted through 8 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 2 channels. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. IC management conducts in a 3.3V-voltage supply. Power ics operate at 2 supply voltages. Power management is included in the Surface Mount mount. There are a total of 8 pins on power management. The pins of the power management system count 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 10μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use CAT1026, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature is 3mA.
CAT1026WI-30-GT3 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
10μA operating supply current
CAT1026WI-30-GT3 Applications
There are a lot of ON Semiconductor CAT1026WI-30-GT3 Voltage Supervisors applications.
- Detection of phase loss
- Sensitive sensors
- Detection of phase sequence
- Microcontroller system
- Dash board
- Automotive permanent magnet synchronous motors
- Precision measurement
- Urban rail transit weak current power monitoring
- Medical-specific isolation transformer
- Personal computers
