CAT1027WI-42-GT3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.375V |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CAT1027 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | -2V |
| Operating Supply Current | 10μA |
| Max Supply Current | 3mA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.25V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 130ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT1027WI-42-GT3 Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 2 channels, each of which can be used independently. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. The package peak reflow temperature is specified to be NOT SPECIFIED. When a supply voltage of 5V is applied to the power ic, it conducts. When a supply voltage of 2 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. 8 pins are present in total in this power management. This power management system has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than -2V volts. There should be no more than 7V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. Supplied with a operating current of 10μA, this PMIC is capable of fully function as specified. Among other features, IC power can be also taken advantage of [0], for instance. It is always advisable to use CAT1027, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 3mA.
CAT1027WI-42-GT3 Features
Multi-Voltage Supervisor type
Minimum supply voltage of -2V
10μA operating supply current
CAT1027WI-42-GT3 Applications
There are a lot of ON Semiconductor CAT1027WI-42-GT3 Voltage Supervisors applications.
- Power distribution systems of operating room
- Power distribution systems of ICU
- Transformer load monitoring equipment
- DVR
- Power communication system
- Microprocessor system
- Leakage protection
- Personal computers
- Utility meter
- Medical-specific insulation monitor
