CAT1161LI-25-G
| Parameters | |
|---|---|
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1W |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.309, 7.87mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.625V |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | CAT1161 |
CAT1161LI-25-G Overview
As you can see, this power management is mounted through 8 terminals. A Tube package is used to package the power management. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. There are 8-DIP (0.309, 7.87mm) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Through Hole-axis. A total of 8 pins are located on this power management. 8 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.7V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. Power management recommends the Through Hole mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is estimated that the voltage supervisor's supply current is 3mA. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use CAT1161, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 3mA can be used.
CAT1161LI-25-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1161LI-25-G Applications
There are a lot of ON Semiconductor CAT1161LI-25-G Voltage Supervisors applications.
- Electric heating appliances
- emergency room
- Smart meter
- Personal computers
- Military electronics
- DVR
- Sensitive sensors
- Microcontroller system
- Radar
- Power distribution systems of infant care room
