CAT1163LI-30-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | CAT1163 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1W |
| Max Supply Current | 3mA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CAT1163LI-30-G Overview
As you can see, this power management is mounted through 8 terminals. Packaged in a Tube-shape, IC management comes with a number of features. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. When a supply voltage of 3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. By Through Hole, IC management has been mounted. A total of 8 pins are located on this power management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2.7V. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. Through Hole mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. Supplied with a operating current of 3mA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to CAT1163, the base PMIC number. The maximum supply temperature voltage supervisor can handle is 3mA.
CAT1163LI-30-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1163LI-30-G Applications
There are a lot of ON Semiconductor CAT1163LI-30-G Voltage Supervisors applications.
- Sensitive sensors
- Satellite navigation
- DVR
- Digitally controlled LDO regulators circuit
- Display equipment
- Medical-specific insulation monitor
- Cloud computing
- FPGA design
- Power communication system
- Dash board
