CAT130019SWI-GT3
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | CAT13001 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 3mA |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CAT130019SWI-GT3 Overview
It is mounted through 8 terminals on the power management. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. A supply voltage of 3.3V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. 8 pins are present in total in this power management. This power management system has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.5V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is estimated that the voltage supervisor's supply current is 3mA. You can always use CAT13001, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature voltage supervisor can handle is 3mA.
CAT130019SWI-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.5V
3mA operating supply current
CAT130019SWI-GT3 Applications
There are a lot of ON Semiconductor CAT130019SWI-GT3 Voltage Supervisors applications.
- Magnetic resonance imaging
- Telecommunications equipment
- Embedded computing
- Important electronics for automotive safety
- Electronics installed in the vehicle
- Power communication system
- Set top box
- Power distribution systems of operating room
- Rechargeable batteries
- Refrigeration
