CAT1320LI-42-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.375V |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | CAT1320 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 3mA |
| Power Dissipation | 1W |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CAT1320LI-42-G Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tube. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. When a supply voltage of 3.3V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Through Hole. In total, it has 8 pins on IC management. This power management has 8 pins. There should be a minimum voltage supply (Vsup) of 3V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Through Hole is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 3mA. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using CAT1320, the base power ics number. The power management can work with a maximum supply temperature of 3mA.
CAT1320LI-42-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
3mA operating supply current
CAT1320LI-42-G Applications
There are a lot of ON Semiconductor CAT1320LI-42-G Voltage Supervisors applications.
- Automotive power systems
- Fire equipment power monitoring system
- Battery cars
- Electrical fire monitoring system
- Medical-specific insulation monitor
- Solar power charger
- Network equipment
- Medical-specific isolation transformer
- Detection of phase loss
- Rechargeable batteries
