CAT140029TWI-GT3
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | EEPROMs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT14002 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 1mA |
| Max Supply Current | 1mA |
| Clock Frequency | 0.4MHz |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Memory Width | 1 |
| Min Reset Threshold Voltage | 3.04V |
| Max Reset Threshold Voltage | 3.11V |
| Undervoltage Threshold | 3.04V |
| Overvoltage Threshold | 3.11V |
| Parallel/Serial | SERIAL |
| Programming Voltage | 3V |
| Write Cycle Time-Max (tWC) | 5ms |
| Data Retention Time-Min | 100 |
| Write Protection | SOFTWARE |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CAT140029TWI-GT3 Overview
This power management consists of 8 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3.3V. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. EEPROMs is a subcategory of this PMIC chip. 8 pins are present in total in this power management. This power management has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2.5V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a 1mA supply current present in the power management. You can always use CAT14002, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 3/5V volts to function properly. The maximum supply temperature voltage supervisor can handle is 1mA.
CAT140029TWI-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.5V
1mA operating supply current
CAT140029TWI-GT3 Applications
There are a lot of ON Semiconductor CAT140029TWI-GT3 Voltage Supervisors applications.
- Leakage current detection
- DC stabilized power supply module
- Precision measurement
- Efficient information transmission
- Medical-specific isolation transformer
- Microprocessor system
- Network equipment
- Detection of phase imbalance
- Display equipment
- External alarm
