CAT3224HV3-GT2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT3224 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Power Supplies | 3.6V |
| Max Supply Voltage | 4.2V |
| Min Supply Voltage | 1.3V |
| Output Current | 4A |
| Max Supply Current | 2A |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 2A |
| Current - Output / Channel | 2A Flash |
| Internal Switch(s) | Yes |
| Number of Segments | 2 |
| Switching Frequency | 800kHz |
| Multiplexed Display Capability | NO |
| Height | 750μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT3224HV3-GT2 Overview
Its 16-WFQFN Exposed Pad package is used to save board space. These LED drivers have 2 outputs.Surface Mount is used for mounting the led light driver.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.It is capable of working normally at -40°C~85°C TA.It is clear that Camera Flash will benefit from the program.It operates with terminations of 16.The LED light driver is configured with a base of 0 pins.2 segments are present.This is mounted by Surface Mount.The LED driver can be found under the base part number CAT3224.4.2V is a reasonable voltage.16 pins are included in it.According to its characteristics, it is also classified into Display Drivers.When the input voltage is set to 2V, it operates.It is designed to operate at a minimal voltage of 1.3V to achieve the highest efficiency.In the presence of a maximum supply current, the value of 5.5V will be reached.If the maximum supply current is less than 2A, the device is capable of providing high efficiency.In this case, the load can only be supplied with 4A current.It's possible for this electronic component to fully function when the switching frequency is maintained at 800kHz.5.5V is the voltage at the output terminal.
CAT3224HV3-GT2 Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 800kHz
Output voltage of 5.5V
CAT3224HV3-GT2 Applications
There are a lot of ON Semiconductor CAT3224HV3-GT2 LED Driver ICs applications.
- Stage and Studio lighting
- Down lights
- General lighting
- Auxiliary lights for on-vehicle cameras
- Refrigeration lighting
- LED headlights
- Museum lighting
- Stage Lighting and Signage
- Constant Voltage Power Source for portable equipment
- Industrial LED Lighting: Image Recognition Devices
