CAT32TDI-GT3
| Parameters | |
|---|---|
| Max Supply Voltage | 7V |
| Min Supply Voltage | 2V |
| Output Current | 40mA |
| Max Supply Current | 700μA |
| Topology | Step-Up (Boost) |
| Halogen Free | Halogen Free |
| Output Current per Channel | 40mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Voltage - Supply (Min) | 2V |
| Multiplexed Display Capability | NO |
| Height | 900μm |
| Length | 2.9mm |
| Width | 2.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Frequency | 1.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT32 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
CAT32TDI-GT3 Overview
There is also a SOT-23-6 Thin, TSOT-23-6 package that is used to save space on the board. In LED drivers, the outputs are all set to 1.It is possible to mount the led driver using Surface Mount.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.There are considerable benefits for Backlight.In this case, the frequency is 1.2MHz.It operates with terminations of 6.The configuration of the board is built around 6 pins.Undetermined failures can occur if the voltage supply is below 2V.A total of 4 segments have been created.It's mounted in Surface Mount.There is a base part number CAT32 for this LED driver.An acceptable maximum value for the supply voltage is 7V.On it, there are 6 pins.In addition, its characteristics are classified into Display Drivers.It is designed to operate at a minimal voltage of 2V to achieve the highest efficiency.When the maximum supply current is less than 700μA, this device is able to provide high efficiency.The current that can be supplied to the load is 40mA.This device has a voltage output of 20V volts.
CAT32TDI-GT3 Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3V
Output voltage of 20V
CAT32TDI-GT3 Applications
There are a lot of ON Semiconductor CAT32TDI-GT3 LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Industrial LED Lighting: Image Recognition Devices
- Down lighting
- Stage Lighting and Signage
- LED Lightings for Inspection Devices
- OLED power supply for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Amusement Machines
- Constant Voltage Power Source for portable equipment
- Museum lighting
