CAT3604VHV4-GT2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT3604 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Voltage | 7V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 30mA |
| Max Supply Current | 30mA |
| Max Output Voltage | 6V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30mA |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 3 |
| Switching Frequency | 1.3MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT3604VHV4-GT2 Overview
On the board, there is also a 16-WQFN Exposed Pad package that saves space.LED drivers use 4 outputs for their design.To mount, use Surface Mount.In this case, it emerges as a DC DC Regulator with a high efficiency.At -40°C~85°C TA, the led driver is capable of operating.There are many benefits for Backlight.On the basis of the frequency 1MHz, it operates.The operation of this system is supported by 16 terminations.It has a base of 16 pins.There are estimated to be 3 segments.It's mounted on the way to Surface Mount.Under the base part number CAT3604, you will find this LED driver.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.The device has 16 pins.Additionally, it can be classified as Display Drivers based on its characteristics.The minimum input voltage for this device is 2.5V.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 2.5V.It is possible to supply current up to 5.5V.If the maximum supply current is less than 30mA, the device is capable of providing high efficiency.30mA is the maximum amount of current that can be supplied to the load.This electronic component can fully perform when the switching frequency is 1.3MHz.The voltage at the output terminal is 7V.Voltages should not exceed 6V volts at the output.
CAT3604VHV4-GT2 Features
Available in the 16-WQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
Switching frequency of 1.3MHz
Output voltage of 7V
CAT3604VHV4-GT2 Applications
There are a lot of ON Semiconductor CAT3604VHV4-GT2 LED Driver ICs applications.
- Portable lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Panel lighting
- Scanners and Handy Terminals
- LED Lightings for Industrial Equipment
- LED Lighting PFCs, Linear Dimmable
- OLED power supply for portable equipment
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for portable equipment
- Museum lighting
