CAT3612HV2-GT2
| Parameters | |
|---|---|
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Max Supply Current | 350mA |
| Voltage - Output | 7V |
| Topology | Switched Capacitor (Charge Pump) |
| Halogen Free | Halogen Free |
| Current - Output / Channel | 150mA Flash |
| Internal Switch(s) | Yes |
| Dimming | Multi-Step |
| Number of Segments | 2 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 750μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.45mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT3612 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Power Supplies | 3.3/5V |
CAT3612HV2-GT2 Overview
In order to save board space, the led driver uses the 12-WFDFN Exposed Pad package. LED drivers with this design have 2 outputs.We are using Surface Mount as the mounting method.When it emerges as a DC DC Regulator, it shows high-performance and reliability.The led light driver is capable of working normally at -40°C~85°C TA.Camera Flash has considerable advantages.As a result, it operates in accordance with the frequency of 1MHz.12 terminations are used in its operation.This configuration is built upon 12 pins.Undetermined failures may occur if the voltage supply falls below 3V.Based on our estimates, there are 2 segments.It's mounted in Surface Mount.LED drivers are found under the base part number CAT3612.It is acceptable to operate with a supply voltage of 5.5V.The voltage output by it is 7V.The device has a pin count of 12.Moreover, it can be classified as Display Drivers due to its characteristics.As a result, it runs at a minimal voltage of 3V in order to achieve the best efficiency.If the maximum supply current is less than 350mA, the device is capable of providing high efficiency.
CAT3612HV2-GT2 Features
Available in the 12-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
CAT3612HV2-GT2 Applications
There are a lot of ON Semiconductor CAT3612HV2-GT2 LED Driver ICs applications.
- OLED power supply for portable equipment
- Down lights
- Refrigeration lighting
- Amusement Machines
- LED Lighting PFCs, Linear Dimmable
- LED headlights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Industrial LED Lighting: Image Recognition Devices
- LED Lightings for Inspection Devices
- Flicker-free LED Lighting using R1580N
