CAT3614HV2-T2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Frequency | 800kHz~1.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT3614 |
| Pin Count | 12 |
| Number of Outputs | 4 |
| Output Voltage | 7V |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Output Current | 31mA |
| Topology | Switched Capacitor (Charge Pump) |
| Current - Output / Channel | 31mA |
| Interface IC Type | LED DISPLAY DRIVER |
| Number of Segments | 4 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
CAT3614HV2-T2 Overview
12-WFDFN Exposed Pad package saves space on the board. This LED driver has 4 outputs.In this case, mounting method is Surface Mount.The led light driver operates normally at -40°C~85°C TA. The benefits are considerable for Backlight.Based on the frequency of 800kHz~1.3MHz, it operates on the basis of a pulse.In this case, it operates with terminations of 0.It is configured with 12 pins as its base.If the voltage supply is less than 3V, undetermined failures will occur.The number of segments is estimated to be 4.There is a device mounted on the Surface Mount.The LED driver is based on part number CAT3614.The device has 12 pins.Depending on its characteristics, it is classified into Display Drivers.31mA is the maximum current the load can handle.Powering systems requires an internal voltage of 5.5V.This part is equipped with an interface IC marked with LED DISPLAY DRIVER.There is 7V voltage at the output terminal.
CAT3614HV2-T2 Features
Available in the 12-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 800kHz~1.3MHz
Supply voltage of 3.6V
Operating with the supply voltage of 5.5V
Output voltage of 7V
CAT3614HV2-T2 Applications
There are a lot of ON Semiconductor CAT3614HV2-T2 LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Sports Facility Lighting
- LED headlights
- LED Lightings for Industrial Equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Flicker-free LED Lighting using R1580N
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Other Electronic Devices
- Auxiliary lights for on-vehicle cameras
