CAT3626HV4-GT2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Frequency | 1MHz |
| Base Part Number | CAT3626 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 192mA |
| Max Supply Current | 3.5mA |
| Voltage - Output | 7V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 32mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C |
| Number of Segments | 6 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT3626HV4-GT2 Overview
There is a 16-WQFN Exposed Pad package on the board that is used to save space. LED drivers design with 6 outputs.Surface Mount represents this mounting method.As a DC DC Regulator, it has high efficiency and reliability.It is possible for the led light driver to operate at a temperature of -40°C~85°C TA.It provides considerable benefits for Backlight.Based on the frequency of 1MHz, it operates.In this case, there are 16 terminations.The base is configured with 16 pins.The segment count is 6.It has been mounted on Surface Mount.Under the base part number CAT3626, you'll find this LED driver.A maximum supply voltage of 5.5V is acceptable.This device has an output voltage of 7V volts.On this device, there are 16 pins.In addition, its characteristics are classified into Display Drivers.It operates with the minimal input voltage of 3V.For maximum efficiency, it operates at the minimal voltage of 3V.Supply current is limited to 5.5V at its maximum value.If the maximum supply current is less than 3.5mA, the device is capable of providing high efficiency.It is possible to supply the load with 192mA current.Electronic components can function properly when their switching frequency is set to 1MHz.
CAT3626HV4-GT2 Features
Available in the 16-WQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
Switching frequency of 1MHz
CAT3626HV4-GT2 Applications
There are a lot of ON Semiconductor CAT3626HV4-GT2 LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- General lighting
- Linear fluorescent
- Amusement Machines
- Refrigeration lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lightings for Inspection Devices
- Scanners and Handy Terminals
- Flicker-free LED Lighting using R1580N
