CAT3636HV3-GT2
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 800kHz~1.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT3636 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 192mA |
| Max Supply Current | 3.8mA |
| Voltage - Output | 7V |
| Topology | Switched Capacitor (Charge Pump) |
| Halogen Free | Halogen Free |
| Current - Output / Channel | 32mA |
| Internal Switch(s) | Yes |
| Number of Segments | 6 |
| Voltage - Supply (Min) | 2.5V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 750μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CAT3636HV3-GT2 Overview
There is also a 16-WFQFN Exposed Pad package that is used to save space on the board. A LED driver using this design has 6 outputs.It adopts the way of Surface Mount for mounting.It emergys as a DC DC Regulator with high efficiency and reliable performance.It is possible for the led driver ic to function normally at -40°C~85°C TA.Backlight benefits significantly from the program.A frequency of 800kHz~1.1MHz is used to operate it.In this case, the terminations are set to 16.It is configured with 16 pins as its base.It is possible for undetermined failures to occur if the voltage supply falls below 2.5V.The segment count is 6.I have mounted it by Surface Mount.CAT3636 is the base part number for the LED driver.It is acceptable to have a maximum voltage of 5.5V.There is 7V voltage output from it.The device has a pin count of 16.In addition, it can be classified as Display Drivers according to its characteristics.For maximum efficiency, it operates at the minimal voltage of 2.5V.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 3.8mA.The load is capable of receiving 192mA current.
CAT3636HV3-GT2 Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 800kHz~1.1MHz
Supply voltage of 3.6V
CAT3636HV3-GT2 Applications
There are a lot of ON Semiconductor CAT3636HV3-GT2 LED Driver ICs applications.
- Street lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage and Studio lighting
- Replacement lamps
- Constant Voltage Power Source for portable equipment
- LED Lightings for Industrial Equipment
- Down lighting
- LED Lightings for Inspection Devices
- Amusement Machines
- Linear fluorescent
