CAT3636HV3-T2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2008 |
| Series | QUAD-Mode® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz~1.4MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT3636 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Efficiency | 92 % |
| Output Voltage | 7V |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 32mA |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| fmax-Min | 0.8 MHz |
| Number of Segments | 6 |
| Switching Frequency | 1.1MHz |
| Multiplexed Display Capability | NO |
| Height | 730μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
CAT3636HV3-T2 Overview
The 16-WFQFN Exposed Pad package saves space on the board. Typically, LED drivers have 6 outputs.The led driver mounting is done by using Surface Mount.-40°C~85°C TA is the operating temperature for the led light driver.The benefits of Backlight are considerable.As a result, it operates in accordance with the frequency of 600kHz~1.4MHz.In this case, there are 16 terminations.The LED light driver is configured with a base of 0 pins.There are 6 segments.I have mounted it by Surface Mount.A base part number of CAT3636 is associated with this LED driver.It's acceptable for the voltage to be 5.5V.In addition, it has 16 pins.In addition to Display Drivers, it is also classified by its characteristics.With 2.5V as the minimal input voltage, it operates.This system is designed to operate at a minimum voltage of 2.5V to achieve maximum efficiency.In terms of supply current, 5.5V is the maximum value.In this case, the load can only be supplied with 32mA current.Having the switching frequency at 1.1MHz enables this electronic component to perform at its best.LED drivers belonging to the QUAD-Mode? series are used in a wide variety of applications.The interface IC for this part is marked with the LED DISPLAY DRIVER.The output voltage is 7V.
CAT3636HV3-T2 Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 600kHz~1.4MHz
Supply voltage of 3.6V
Switching frequency of 1.1MHz
Output voltage of 7V
CAT3636HV3-T2 Applications
There are a lot of ON Semiconductor CAT3636HV3-T2 LED Driver ICs applications.
- Portable lighting
- Stage and Studio lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lightings for Inspection Devices
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Scanners and Handy Terminals
- Dimmable LED for vehicle interiors
- Auxiliary lights for on-vehicle cameras
- Industrial LED Lighting: Image Recognition Devices
