CAT3649HV3-GT2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz~1.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT3649 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Efficiency | 92 % |
| Power Supplies | 2.5/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.4V |
| Output Current | 25mA |
| Max Supply Current | 4mA |
| Voltage - Output | 7V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.4V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 6 |
| Switching Frequency | 200kHz |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT3649HV3-GT2 Overview
Save board space with 16-WFQFN Exposed Pad package. These LED drivers have 6 outputs.In order to mount the led light driver, Surface Mount is used.As a DC DC Regulator, it has high efficiency and reliability.It is able to work normally at the operating temperature of -40°C~85°C TA.There are considerable benefits for Backlight.The system operates at a frequency of 1MHz~1.3MHz.There are 16 terminations that are designed to operate with it.With 16 pins at the base, this LED driver has a base configuration.It is estimated that there are 6 segments.On the Surface Mount, a device is mounted.LED drivers can be found under the base part number CAT3649.The supply voltage of 5.5V is an acceptable maximum value.7V is the output voltage.The device has 16 pins.Moreover, it can be classified as Display Drivers due to its characteristics.A minimal input voltage of 2.4V is required for it to operate.This system is designed to operate at a minimum voltage of 2.4V to achieve maximum efficiency.5.5V is the maximum value of the supply current.When the maximum supply current is below 4mA, the device can deliver high efficiency.It is possible to supply the load with 25mA current.When the switching frequency is maintained at 200kHz, this electronic component is able to fully play its functions.
CAT3649HV3-GT2 Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz~1.3MHz
Supply voltage of 3.6V
Switching frequency of 200kHz
CAT3649HV3-GT2 Applications
There are a lot of ON Semiconductor CAT3649HV3-GT2 LED Driver ICs applications.
- Architectural lighting
- Industrial LED Lighting: Image Recognition Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Other Electronic Devices
- LED backlight driver for LCD displays for portable equipment
- Stage Lighting and Signage
- LED headlights
- Constant Voltage Power Source for portable equipment
- Down lights
- General lighting
