CAT4008W-T2
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT4008 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 9mA |
| Output Current | 44mA |
| Max Supply Current | 9mA |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 20mA |
| Current - Output / Channel | 80mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 150mA |
| Low Level Output Current | 2mA |
| Number of Segments | 8 |
| Switching Frequency | 25MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CAT4008W-T2 Overview
In order to save board space, the led driver uses the 16-SOIC (0.154, 3.90mm Width) package. The LED driver's design uses 8 outputs.Surface Mount is used to mount the led light driver.Linear emerges with high efficiency and reliability.When the temperature is -40°C~85°C TA, it can work normally.It provides considerable benefits for Signage.The system operates with a termination of 0.With 16 pins at the base, this LED driver has a base configuration.The segment count is 8.It's mounted on the way to Surface Mount.This LED driver has the part number CAT4008.It is acceptable to have a maximum voltage of 5.5V.In this device, there are 16 pins.As a result, its characteristics can also be categorized as Display Drivers.The input voltage must be minimally 3V.For maximum efficiency, it requires a minimal supply voltage of 3V.In terms of supply current, 5.5V is the maximum value.It is capable of delivering high efficiency when the maximal supply current is below 9mA.You can supply 44mA current to the load.This electronic component can fully perform when the switching frequency is 25MHz.
CAT4008W-T2 Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 25MHz
CAT4008W-T2 Applications
There are a lot of ON Semiconductor CAT4008W-T2 LED Driver ICs applications.
- Stage and Studio lighting
- Dimmable LED for vehicle interiors
- Panel lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED backlight driver for LCD displays for Tablets and Note PCs
- White LED Backlight for portable equipment
- Flicker-free LED Lighting using R1580N
- Down lighting
- Sports Facility Lighting
- Auxiliary lights for on-vehicle cameras
