CAT4008Y-T2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CAT4008 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 9mA |
| Output Current | 100mA |
| Max Supply Current | 100mA |
| Topology | Shift Register |
| Halogen Free | Halogen Free |
| Current - Output / Channel | 80mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 150mA |
| fmax-Min | 25 MHz |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT4008Y-T2 Overview
It saves board space with the 16-TSSOP (0.173, 4.40mm Width) package. LED drivers have a total of 8 outputs that are used in the design of the drivers.The led driver mounting is done by using Surface Mount.In this case, it emerges as a Linear with a high efficiency.It is possible for the led driver ic to operate normally at -40°C~85°C TA.The benefits of Signage are considerable.It operates on the basis of the frequency of 25MHz.There are 16 terminations associated with it.With 16 pins at the base, this LED driver has a base configuration.Undetermined failures will occur if the voltage supply is less than 3V.Based on our estimates, there are 8 segments.Surface Mount is mounted on it.Under the base part number CAT4008, you'll find this LED driver.It is acceptable to have a maximum voltage of 5.5V.There are 16 pins on it.In addition, it can be classified as Display Drivers according to its characteristics.For maximum efficiency, it requires a minimal supply voltage of 3V.In order to maintain maximum efficiency, the supply current cannot exceed 100mA.There is no current available to supply to the load.
CAT4008Y-T2 Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 25MHz
Supply voltage of 5V
CAT4008Y-T2 Applications
There are a lot of ON Semiconductor CAT4008Y-T2 LED Driver ICs applications.
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for portable equipment
- Stage Lighting and Signage
- Replacement lamps
- Linear fluorescent
- Portable lighting
- Dimmable LED for vehicle interiors
- OLED power supply for portable equipment
- Street lighting
- High-end retail lighting
