CAT4016VSR-T2
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Tin (Sn) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | CAT4016 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 44mA |
| Max Supply Current | 10mA |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Current - Output / Channel | 80mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 150mA |
| Dimming | PWM |
| Number of Segments | 16 |
| Switching Frequency | 25MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.73mm |
| Length | 8.65mm |
| Width | 3.895mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
CAT4016VSR-T2 Overview
Using its 24-SSOP (0.154, 3.90mm Width) package, it is possible to save board space. LED drivers designed using this technology use 16 outputs.Mounting is done according to the Surface Mount method.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.The led light driver can work at -40°C~85°C TA.Signage has many advantages.For its operation, 24 terminations are designed.This module has 24 pins as its base.It consists of 16 segments.The mount is in the way of Surface Mount.This LED driver can be found under the base part number CAT4016.It is acceptable to operate with a supply voltage of 5.5V.A device with 24 pins is available.Additionally, it can be classified as Display Drivers based on its characteristics.It operates at a voltage of 3V as its minimal input voltage.A minimum supply voltage of 3V is required to meet the highest efficiency standards.It reaches 5.5V when the maximum supply current is allowed.Its high efficiency is based on the fact that the maximal supply current should not exceed 10mA.The load is capable of receiving 44mA current.This electronic component can fully perform when the switching frequency is 25MHz.
CAT4016VSR-T2 Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 25MHz
CAT4016VSR-T2 Applications
There are a lot of ON Semiconductor CAT4016VSR-T2 LED Driver ICs applications.
- Gallery lighting
- Panel lighting
- LED Lightings for Inspection Devices
- Constant Voltage Power Source for portable equipment
- Refrigeration lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Auxiliary lights for on-vehicle cameras
- Down lights
