CAT4016W-T1
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Current Rating | 150mA |
| Base Part Number | CAT4016 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Interface | Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 44mA |
| Max Supply Current | 10mA |
| Max Output Voltage | 5.5V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 20mA |
| Min Output Voltage | 400mV |
| Current - Output / Channel | 80mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 150mA |
| Dimming | PWM |
| Number of Segments | 16 |
| Switching Frequency | 25MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 2.65mm |
| Length | 15.3mm |
| Width | 7.47mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
CAT4016W-T1 Overview
Its 24-SOIC (0.295, 7.50mm Width) package is used to save board space. In this LED driver, there are 16 outputs.The mounting method is Surface Mount.In this case, it emerges as a Linear with a high efficiency.LED drivers capable of operating at -40°C~85°C TA can be used.There are significant benefits for Signage.In this case, the termination value is 24.There are 24 pins used to form the base of its configuration.The number of segments is 16.Surface Mount is mounted on it.The base part number for this LED driver is CAT4016.There is no problem with the voltage of 5.5V.There are 24 pins on it.In addition to Display Drivers, it is also classified by its characteristics.This device operates with a minimum input voltage of 3V volts.To meet high efficiency standards, it works with a voltage of 3V.Whenever the maximum supply current is allowed, the value reaches 5.5V.When the maximum supply current is below 10mA, it is capable of delivering high efficiency.There is no current available to supply to the load.This electronic component may perform its functions fully if the switching frequency is maintained at 25MHz.Voltages above 5.5V should not be allowed.The voltage it outputs stays at 400mV.
CAT4016W-T1 Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 25MHz
CAT4016W-T1 Applications
There are a lot of ON Semiconductor CAT4016W-T1 LED Driver ICs applications.
- White LED Backlight for portable equipment
- Scanners and Handy Terminals
- Industrial LED Lighting: Image Recognition Devices
- Down lights
- OLED power supply for portable equipment
- Panel lighting
- Flicker-free LED Lighting using R1580N
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage Lighting and Signage
- High-end retail lighting
