CAT4016Y-T2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Tin (Sn) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 150mA |
| Base Part Number | CAT4016 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Interface | Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 44mA |
| Max Supply Current | 10mA |
| Max Output Voltage | 5.5V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Min Output Voltage | 400mV |
| Current - Output / Channel | 80mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 150mA |
| Dimming | PWM |
| Number of Segments | 16 |
| Switching Frequency | 25MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT4016Y-T2 Overview
24-TSSOP (0.173, 4.40mm Width) saves board space. LED drivers use 16 outputs for their design.Surface Mount is used for mounting.With high efficiency, it appears as a Linear.-40°C~85°C TA is a valid operating temperature for the led driver.It provides considerable benefits for Signage.There are 24 terminations associated with it.To form its configuration, there are 24 pins.It is estimated that there are 16 segments.There is a mounting of it by Surface Mount.LED drivers have a base part number of CAT4016.Ideally, the supply voltage should be 5.5V.It consists of 24 pins.According to its characteristics, it is also classified into Display Drivers.A voltage of 3V is its minimal input voltage.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 3V.The maximum value of supply current is 5.5V.As long as the maximum supply current is less than 10mA, this device is capable of providing high efficiency.You can supply 44mA current to the load.Electronic components can function properly when their switching frequency is set to 25MHz.It is important that the output voltage does not exceed 5.5V.400mV is the minimal voltage it outputs.
CAT4016Y-T2 Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 25MHz
CAT4016Y-T2 Applications
There are a lot of ON Semiconductor CAT4016Y-T2 LED Driver ICs applications.
- Amusement Machines
- Other Electronic Devices
- LED headlights
- Architectural lighting
- Museum lighting
- Constant Voltage Power Source for portable equipment
- OLED power supply for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- Down lights
- General lighting
