CAT4106YP-T2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight, Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT4106 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 175mA |
| Max Supply Current | 4.4mA |
| Voltage - Output | 36V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 175mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 175mA |
| Low Level Output Current | 10mA |
| Dimming | PWM |
| Number of Segments | 4 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT4106YP-T2 Overview
There is a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package on the board that is used to save space. There are 4 outputs used for the design of this LED drivers.It is mounted using Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Regulator.The led light driver can work at -40°C~85°C TA.It provides considerable benefits for Backlight, Lighting.There are 16 terminations that are designed to operate with it.It is configured with 16 pins as its base.The segment count is 4.The mount is in the way of Surface Mount.There is a base part number CAT4106 for this LED driver.An acceptable maximum value for the supply voltage is 5.5V.This device produces a voltage of 36V volts.16 pins are included in it.Moreover, it can be classified as Display Drivers due to its characteristics.It operates at a voltage of 3V as its minimal input voltage.To meet high efficiency standards, it works with a voltage of 3V.The maximum supply current is 5.5V.When the maximum supply current is below 4.4mA, it is capable of delivering high efficiency.It is possible to supply the load with 175mA current.This electronic component can fully perform when the switching frequency is 1MHz.
CAT4106YP-T2 Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 1MHz
CAT4106YP-T2 Applications
There are a lot of ON Semiconductor CAT4106YP-T2 LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- Portable lighting
- Linear fluorescent
- Flicker-free LED Lighting using R1580N
- Street lighting
- Gallery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Scanners and Handy Terminals
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Auxiliary lights for on-vehicle cameras
