CAT4201TD-GT3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Frequency | 50kHz~1MHz |
| Base Part Number | CAT4201 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 94 % |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 6.5V |
| Nominal Supply Current | 1mA |
| Output Current | 350mA |
| Max Supply Current | 400μA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 0V |
| Max Input Voltage | 36V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 350mA |
| Internal Switch(s) | Yes |
| Dimming | Analog |
| Number of Segments | 1 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 900μm |
| Length | 2.9mm |
| Width | 2.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT4201TD-GT3 Overview
The SOT-23-5 Thin, TSOT-23-5 package is used for saving board space. Typically, LED drivers have 1 outputs.The led driver mounting is done by using Surface Mount.It emerges as a DC DC Regulator, which is efficient and reliable.It is possible for the led driver ic to function normally at -40°C~125°C TA.The benefits it provides to Lighting are considerable.50kHz~1MHz is the frequency in which it operates.5 terminations are used in its operation.In this LED driver, the base is configured as 5.It consists of 1 segments.It's mounted in Surface Mount.This LED driver can be found under the base part number CAT4201.It is acceptable to have a maximum voltage of 36V.There are 5 pins on it.Additionally, it can be classified as Display Drivers based on its characteristics.When the input voltage is set to 0V, it operates.With a minimal supply voltage of 6.5V, it reaches the highest efficiency levels.36V is the maximum value of supply current that can be used.When the maximum supply current is below 400μA, the device can deliver high efficiency.The load is capable of receiving 350mA current.Electronic components can function properly when their switching frequency is set to 1MHz.
CAT4201TD-GT3 Features
Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -40°C~125°C TA
Frequency of 50kHz~1MHz
Supply voltage of 13V
Switching frequency of 1MHz
CAT4201TD-GT3 Applications
There are a lot of ON Semiconductor CAT4201TD-GT3 LED Driver ICs applications.
- Replacement lamps
- Stage Lighting and Signage
- Gallery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Industrial LED Lighting: Image Recognition Devices
- Panel lighting
- Amusement Machines
- Street lighting
- Other Electronic Devices
- LED Lighting PFCs, Linear Dimmable
