CAT4237TD-GT3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT4237 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.8V |
| Output Current | 31.5mA |
| Max Supply Current | 1.5mA |
| Voltage - Output | 30V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.8V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Internal Switch(s) | Yes |
| High Level Output Current | 40mA |
| Low Level Output Current | 1mA |
| Dimming | Analog, PWM |
| Number of Segments | 8 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 900μm |
| Length | 2.9mm |
| Width | 2.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT4237TD-GT3 Overview
There is also a SOT-23-5 Thin, TSOT-23-5 package that is used to save space on the board. LED drivers design with 1 outputs.Surface Mount is used for mounting the led light driver.With high efficiency, it emerges as a DC DC Regulator.The led light driver operates normally at -40°C~85°C TA. There are considerable benefits for Backlight.In this case, it operates with terminations of 0.Its configuration is based on 5 pins.Segments counted are 8.There is a mounting of it by Surface Mount.There is a base part number CAT4237 for this LED driver.It is acceptable to supply voltages of 5.5V volts.The output voltage of the device is 30V.There are 5 pins on this device.In addition, it can be classified as Display Drivers according to its characteristics.At its minimal input voltage, it operates at 2.8V.For highest efficiency, it works with a minimal supply voltage of 2.8V.There is 5.5V maximum value for supply current.When the supply current should be less than 1.5mA, the device will provide high efficiency.In this case, the load can only be supplied with 31.5mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 1MHz.
CAT4237TD-GT3 Features
Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1MHz
CAT4237TD-GT3 Applications
There are a lot of ON Semiconductor CAT4237TD-GT3 LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Down lights
- Linear fluorescent
- Replacement lamps
- Architectural lighting
- Medical surgery lighting
- Museum lighting
- High-end retail lighting
- A- lamps
- General lighting
