CAT4240TD-GT3
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT4240 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 94 % |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.8V |
| Output Current | 31.5mA |
| Max Supply Current | 1.5mA |
| Voltage - Output | 38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 60mA |
| Nominal Input Voltage | 5.5V |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 750mA |
| Dimming | Analog, PWM |
| Number of Segments | 10 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CAT4240TD-GT3 Overview
Its SOT-23-5 Thin, TSOT-23-5 package is used to save board space. For the design of this LED driver, 1 outputs are used.Surface Mount is used for mounting the led light driver.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.It is possible for the led driver ic to operate normally at -40°C~85°C TA.There are 5 terminations that are designed to operate with it.This configuration is built upon 5 pins.A total of 10 segments are estimated.I have mounted it by Surface Mount.The base part number for this LED driver is CAT4240.Ideally, the supply voltage should be 5.5V.It produces a voltage of 38V volts.In this device, there are 5 pins.As a result of its characteristics, it is also classified as Display Drivers.The minimal input voltage is 2V.This system is designed to operate at a minimum voltage of 2.8V to achieve maximum efficiency.5.5V is the maximum value of the supply current.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 1.5mA.It is possible to supply the load with 31.5mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 1MHz.
CAT4240TD-GT3 Features
Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1MHz
CAT4240TD-GT3 Applications
There are a lot of ON Semiconductor CAT4240TD-GT3 LED Driver ICs applications.
- White LED Backlight for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Refrigeration lighting
- Portable lighting
- Architectural lighting
- Street lighting
- Amusement Machines
- General lighting
- High-end retail lighting
- LED Lighting PFCs, Linear Dimmable
