CAT809LTBI-GT3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.62V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | CAT809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 20μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.02mA |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| Height | 1.12mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT809LTBI-GT3 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When a supply voltage of 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. In total, it has 3 pins on IC management. 3 pins are present on the power management system. It is recommended that Vsup should not be less than 1.2V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a supply current of 20μA for the power management. As well as this, there are other features to mention such as [0], for example. To find similar IC managements from the manufacturer, you can always search by CAT809. To be able to work, this power management requires 5V volts of power.
CAT809LTBI-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
20μA operating supply current
CAT809LTBI-GT3 Applications
There are a lot of ON Semiconductor CAT809LTBI-GT3 Voltage Supervisors applications.
- Detection of phase loss
- Kitchen appliances
- Sensitive sensors
- Important electronics for automotive protection
- Analog circuit
- Leakage current detection
- Urban rail transit weak current power monitoring
- Military electronics
- Low voltage/high power - AI, GPU
- External alarm
