CAT809MTBI-T3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | CAT809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 20μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.02mA |
| Min Reset Threshold Voltage | 4.31V |
| Max Reset Threshold Voltage | 4.45V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.31V |
| Overvoltage Threshold | 4.45V |
| Length | 2.92mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CAT809MTBI-T3 Overview
Power management is mounted through 3 terminals. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. The supervisor is always powered by a 5V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 3 pins. Power managment ic pin count is 3. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 20μA for the power management. For similar manage ics search of the manufacturer, you can always refer to CAT809, the base PMIC number. In order to operate this power management, it requires 5V volts of power.
CAT809MTBI-T3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
20μA operating supply current
CAT809MTBI-T3 Applications
There are a lot of ON Semiconductor CAT809MTBI-T3 Voltage Supervisors applications.
- Stable power system
- Sensitive sensors
- Linux and server computing
- Power distribution systems of infant care room
- Personal computers
- Detection of phase loss
- Power distribution systems of CCU
- Digitally controlled LDO regulators circuit
- Unattended substation automation
- Solar power charger
