Parameters |
Packaging |
Cut Tape (CT) |
Published |
2011 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
320mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.95mm |
Base Part Number |
CAT809 |
Output |
Push-Pull, Totem Pole |
Pin Count |
3 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.2V |
Operating Supply Current |
15μA |
Nominal Supply Current |
15μA |
Power Dissipation |
320mW |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
3.08V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Min Reset Threshold Voltage |
3.04V |
Max Reset Threshold Voltage |
3.11V |
Threshold Voltage |
+3.08V |
Undervoltage Threshold |
3.04V |
Overvoltage Threshold |
3.11V |
Height |
1.12mm |
Length |
3.04mm |
Width |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~85°C TA |
CAT809TTBI-T3 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Cut Tape (CT) way. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. When 3.3V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 3 pins on the board. This power management has 3 pins. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 15μA. A similar IC managements number of the manufacturer can always be found by using CAT809, the base power ics number.
CAT809TTBI-T3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
15μA operating supply current
CAT809TTBI-T3 Applications
There are a lot of ON Semiconductor CAT809TTBI-T3 Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- External alarm
- WiFi router
- Linux and server computing
- Telecommunications equipment
- DSP
- Military communications
- Electronics installed in the vehicle
- Embedded computing
- Medical-specific insulation monitor