CAT810JTBI-GT3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | CAT810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 8μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.02mA |
| Min Reset Threshold Voltage | 3.93V |
| Max Reset Threshold Voltage | 4.06V |
| Threshold Voltage | 4V |
| Undervoltage Threshold | 3.93V |
| Overvoltage Threshold | 4.06V |
| Height | 1.12mm |
| Length | 3.04mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT810JTBI-GT3 Overview
There are 3 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management conducts in a 5V-voltage supply. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 3. Power managment ic pin count is 3. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 8μA. A similar IC managements number of the manufacturer can always be found by using CAT810, the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly.
CAT810JTBI-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
8μA operating supply current
CAT810JTBI-GT3 Applications
There are a lot of ON Semiconductor CAT810JTBI-GT3 Voltage Supervisors applications.
- Satellite navigation
- DVR
- Important electronics for automotive safety
- Cloud computing
- Low voltage/high power - AI, GPU
- Detection of phase imbalance
- Solar power charger
- Microprocessor system
- Unattended substation automation
- DC stabilized power supply module
