CAT811STBI-T3
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | CAT811 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Max Output Current | 20mA |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 6μA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
CAT811STBI-T3 Overview
As you can see, this power management is mounted through 4 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes TO-253-4, TO-253AA functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. A supply voltage of 3.3V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 4 pins. The pins of the power management system count 4. It is recommended that Vsup should not be less than 1.2V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. In order to maintain a stable supply current for the power management, 6μA is the recommended value. You can always use CAT811, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 3.3V volts of power.
CAT811STBI-T3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
6μA operating supply current
CAT811STBI-T3 Applications
There are a lot of ON Semiconductor CAT811STBI-T3 Voltage Supervisors applications.
- Leakage protection
- Digitally controlled LDO regulators circuit
- Household appliances
- Leakage current detection
- Detection of phase imbalance
- Low voltage/high power - AI, GPU
- Embedded computing
- Utility meter
- Fire equipment power monitoring system
- Dash board
