CAT811ZTBI-T3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.32V; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | CAT811 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 8μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.28V |
| Max Reset Threshold Voltage | 2.35V |
| Threshold Voltage | +2.32V |
| Undervoltage Threshold | 2.32V |
| Overvoltage Threshold | 2.35V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
CAT811ZTBI-T3 Overview
This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for TO-253-4, TO-253AA functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. When a supply voltage of 2.5V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 4. This power management has 4 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. There is a supply current of 8μA for the power management. There are also other features in the software such as [0], just to mention a few. If you want to search for similar IC managements of this manufacturer, you can always refer to CAT811, which is the base power ics number. It requires 2.5V watts of power to operate this voltage supervisor.
CAT811ZTBI-T3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
8μA operating supply current
CAT811ZTBI-T3 Applications
There are a lot of ON Semiconductor CAT811ZTBI-T3 Voltage Supervisors applications.
- Important electronics for automotive safety
- Analog circuit
- FPGA design
- Embedded computing
- Digitally controlled LDO regulators circuit
- Stable power system
- Automotive power systems
- Low voltage/high power - AI, GPU
- Unattended substation automation
- Power communication system
