CAT823ZTDI-GT3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 4μA |
| Power Dissipation | 571mW |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.32V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.25V |
| Max Reset Threshold Voltage | 2.38V |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 2.38V |
| Height | 900μm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CAT823ZTDI-GT3 Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find SOT-23-5 Thin, TSOT-23-5 functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 2.5V. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. 5 pins are present in total in this power management. Power managment ic pin count is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supervisor's supply current is specified to 4μA. It is always advisable to use CAT823, the base supervisor number, when searching for similar PMICs from the manufacturer.
CAT823ZTDI-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
4μA operating supply current
CAT823ZTDI-GT3 Applications
There are a lot of ON Semiconductor CAT823ZTDI-GT3 Voltage Supervisors applications.
- Radio
- Smart meter
- DSP
- Transformer load monitoring equipment
- Detection of phase imbalance
- emergency room
- Dash board
- Power distribution systems of infant care room
- Functional modules
- Insulation fault location system
