CAT9532WI-T1
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CAT9532 |
| Pin Count | 24 |
| Output Voltage | 5.5V |
| Interface | I2C, SMBus |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Number of I/O | 16 |
| Number of Ports | 1 |
| Nominal Supply Current | 550μA |
| Power Dissipation | 1W |
| Output Current | 25mA |
| Max Supply Current | 550μA |
| Min Input Voltage | 2.3V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 25mA |
| Internal Switch(s) | Yes |
| Low Level Output Current | 25mA |
| Dimming | I2C |
| Number of Segments | 16 |
| Switching Frequency | 400kHz |
| Height Seated (Max) | 2.65mm |
| Length | 15.3mm |
| Width | 7.47mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CAT9532WI-T1 Overview
Board space is saved by its 24-SOIC (0.295, 7.50mm Width) package.Surface Mount is used for mounting the led light driver.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.-40°C~85°C TA is the operating temperature for the led light driver.Backlight has significant advantages.A termination of 24 is used to operate the LED driver.There are 24 pins on its base.It is estimated that there are 16 segments.It's under the CAT9532 base part number.It is acceptable to supply voltages of 5.5V volts.24 pins are available on the device.When the input voltage is set to 2.3V, it operates.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 2.3V.It is possible to supply current up to 5.5V.In order to maintain maximum efficiency, the supply current cannot exceed 550μA.Loads can only be powered by 25mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 400kHz.The voltage at the output terminal is 5.5V.
CAT9532WI-T1 Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3V
Switching frequency of 400kHz
Output voltage of 5.5V
CAT9532WI-T1 Applications
There are a lot of ON Semiconductor CAT9532WI-T1 LED Driver ICs applications.
- Replacement lamps
- Dimmable LED for vehicle interiors
- LED Lighting PFCs, Linear Dimmable
- General lighting
- Street lighting
- High-end retail lighting
- White LED Backlight for portable equipment
- LED Lightings for Industrial Equipment
- OLED power supply for portable equipment
- Medical surgery lighting
