CAT9552WI-T1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Frequency | 400Hz |
| Base Part Number | CAT9552 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 2.5/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Nominal Supply Current | 550μA |
| Power Dissipation | 1W |
| Max Supply Current | 550μA |
| Halogen Free | Halogen Free |
| Output Current per Channel | 25mA |
| Internal Switch(s) | Yes |
| Low Level Output Current | 25mA |
| fmax-Min | 0.4 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 2.3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 2.65mm |
| Length | 15.3mm |
| Width | 7.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CAT9552WI-T1 Overview
The 24-SOIC (0.295, 7.50mm Width) package conserves board space. For the design of these LED drivers, 16 outputs are used.Surface Mount is used for mounting.It emerges as a Linear with high efficiency.The LED driver is capable of operating at a temperature of -40°C~85°C TA.As a result, it operates on the basis of frequency 400Hz.In this case, it uses 24 terminations.With 24 pins at the base, this LED driver has a base configuration.There may be undetermined failures if the voltage supply falls below 2.3V.The number of segments is 16.This LED driver has the part number CAT9552.The voltage of 5.5V can be supplied.24 pins are included in it.In addition, its characteristics are classified into Display Drivers.As a result, it runs at a minimal voltage of 2.3V in order to achieve the best efficiency.When the supply current should be less than 550μA, the device will provide high efficiency.
CAT9552WI-T1 Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 400Hz
Supply voltage of 3V
CAT9552WI-T1 Applications
There are a lot of ON Semiconductor CAT9552WI-T1 LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Architectural lighting
- Dimmable LED for vehicle interiors
- Medical surgery lighting
- Linear fluorescent
- High-end retail lighting
- Sports Facility Lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED headlights
- Scanners and Handy Terminals
