CBT16211DGG,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2014 |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus Switch |
| Resistance | 14Ohm |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBT16211 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 12 x 1:1 |
| Number of Ports | 2 |
| Number of Bits | 24 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
CBT16211DGG,112 Overview
Digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width) for the purpose of saving board space.In this case, it is packaged as Tube.The mounting method digital switch ic uses is Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Several applications are possible for 74CBT series multiplexers.There is a design for terminating 56 as part of its basic configuration.The base part number is 74CBT16211, so you can find its logic switch related parts using that number.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch has 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.This multiplexer ic is configured with 56 pins.It is positioned in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 24 bits.Without external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The resistance is 2.The resistance of the signal switching is 14Ohm.This mux switch configuration has 2 elements.
CBT16211DGG,112 Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBT16211DGG,112 Applications
There are a lot of Nexperia USA Inc. CBT16211DGG,112 Signal Switches / Multiplexers / Decoders applications.
- Implementing boolean functions with multiple variables
- Decimal decoder
- Recording transmission
- LVDS
- Speed control of medern motors
- Idle motor
- Data communication
- Used to connect a single source to multiple destinations
- RF-based home automation system
- Audio transmission
