CBT16212DL,512
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus FET Exchange Switch |
| Resistance | 6Ohm |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBT16212 |
| Pin Count | 56 |
| Circuit | 12 x 2:2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 4 |
| Number of Bits | 24 |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
CBT16212DL,512 Overview
In order to conserve board space, digital switch is included in the 56-BSSOP (0.295, 7.50mm Width).It is packaged in the way of Tube.For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Bus FET Exchange Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.Several applications are possible for 74CBT series multiplexers.It is designed with 56 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 74CBT16212 may also be used.In multiplexer's system, 5V is the voltage supplied.Signal switch has 56 component pins.GULL WING represents the end of conductors.In this case, the supply type is Single.The board is configured with 56 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 24 bits provided.Keeping Vsup at 4V will prevent some unwanted failures.Avoid unnecessary failures by keeping Vsup at 5.5V.The system operates with a resistance of 4.The system operates with a resistance of 6Ohm.
CBT16212DL,512 Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
CBT16212DL,512 Applications
There are a lot of Nexperia USA Inc. CBT16212DL,512 Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Small scale TV wall
- Electronically controlled engine system
- D/A converters
- Microprocessor instruction decoding
- LVDS
- Idle motor
- Textile mills
- Frequency multiplexing system
- Seven segment displays
