CBT16292DGG,118
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 13Ohm |
| Subcategory | Other Logic ICs |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 12 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBT16292 |
| Pin Count | 56 |
| Number of Outputs | 12 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:2 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Power Dissipation | 600mW |
| Propagation Delay | 400 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 24 |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
CBT16292DGG,118 Overview
This is a relatively small item of digital switch that is included in the 56-TFSOP (0.240, 6.10mm Width) in order to save space on the board.Tape & Reel (TR) is the method used for packaging.The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Multiplexer/Demultiplexer as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.The basic configuration of this system includes 56 terminations.Its logic switch base part number is 74CBT16292 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V volts.There are 56 component pins in this turn signal switch.As a result, GULL WING represents the end of the conductors.There is a type of supply of Single.The board is configured with 56 pins.The mounting point is Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.Normally, 5V is powered by a battery.As a result, the turn signal switch consists of 12 outputs.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.There are no external influences on this multiplexer ic, so it consumes 3μA current.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The multiplexer provides 24 inputs.A resistance of 13Ohm is used to operate the signal switching.
CBT16292DGG,118 Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
CBT16292DGG,118 Applications
There are a lot of Nexperia USA Inc. CBT16292DGG,118 Signal Switches / Multiplexers / Decoders applications.
- Home automation system
- Recording transmission
- Electronics industry
- Textile mills
- Enabling different rows of memory depending on address in memory chips
- Microprocessor instruction decoding
- Image transmission
- Data communication
- Automatic health monitoring systems
- PCIe
