CBT3125DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2017 |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBT3125 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
CBT3125DB,112 Overview
In order to conserve board space, digital switch is included in the 14-SSOP (0.209, 5.30mm Width).The package is packaged in the manner of Tube.Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Multiplexers from the 74CBT series can be used in a wide range of applications.There are 14 terminations included in its basic configuration.The base part number is 74CBT3125, which is also useful when looking up signal switch's related components.In multiplexer's system, 5V is the voltage supplied.This turn signal switch consists of 14 component pins.A conductor terminates at GULL WING.There is a type of supply Single that is employed in this case.The board has 14 pins configured.The mounting point is Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.There are 1 bits in signal multiplexer.It consumes 3μA current of multiplexer ic since it is not affected by external factors.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.A resistance of 10Ohm is used to operate it.In the mux switch configuration, there are 4 elements.
CBT3125DB,112 Features
Supplied in the 14-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBT3125DB,112 Applications
There are a lot of Nexperia USA Inc. CBT3125DB,112 Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Automation system
- Code converters
- Enabling different rows of memory depending on address in memory chips
- Data demultiplexing
- Speed control of medern motors
- Time division multiplexing system
- Make half adder
- Data bus control
- Automatic health monitoring systems
